Printer issues can often be quite complicated and might require enough time to fix. And, that’s why you might not be able to fix them all by yourself in these cases. But, you can try certain troubleshooting steps for pretty much all errors on your printers. And, the methods you must apply usually depends on the type of error that you’re facing.
Do you see the error code 49.4c02 on your HP printer? This is quite a common error HP printer users might face from time to time. And, according to the Printer Repairs Dubai, it might mainly have something to do with the print jobs. In any case, there are some simple solutions you might want to try to fix it. So, keep reading to know the solutions you can try.
Simple Yet Effective Methods to Fix the HP Printer Error 49.4c02
For an immediate solution, consulting an expert might be the best solution to the 49.4c02 error. Apart from that, you might want to give the following steps a try, as suggested by Printer Repairs Dubai experts, to resolve it effectively:
-
Restart the Printer and Print a Test Page
You might want to start with the simplest solution to fix this error. In that case, you must turn off your printer for a minute. This might help you resolve any temporary errors in it. Once you’re ready, turn it back on and try printing a test page.
-
Remove all Unfinished Print Jobs from the Queue
Have you assigned a large number of print jobs to your printer? Then, that might explain the error that you’re facing while printing. After all, certain print jobs might get stuck and make your printer stop printing as a result. So, deleting the print jobs might provide you with an effective solution.
And, for that, you need to stop the Print Spooler service first. You can do that from the Services section on your device. Find the Print Spooler there and right-click it. Then, stop the service and minimise the page. After that, you need to open the File Manager on your device. Here, you need to look for the spooler files.
The spooler files are usually located in the system drive of your PC. So, find and open the spooler folder and delete all its files to clear the print queue. This can fix the 49.4c02 in many cases. But, if it doesn’t, you can try some more solutions which often work.
-
Upgrade the Firmware of Your Printer
The firmware is a significant factor in your printer’s performance. Like other software, you need to update it regularly to avoid various kinds of problems. Has it been a long time since you had updated the firmware version? If yes, then you might have found the cause of the error you’re facing.
Many users have found a long-lasting solution to the error by getting a firmware update. So, you must give it a try if clearing the print queue didn’t work.
Find out your printer’s firmware version, and then download the latest one from HP’s official website. Install the update and check whether the error persists.
You can proceed with this method using the Firmware Update Utility or the FTP network.
-
Print Your PDF Files as Images
Many users have reported facing the HP printer error 49.4c02 while trying to print PDF files. And, this may happen due to various reasons. PDF files might often have fonts that the printer’s memory can’t process. In such cases, you can simply fix the error by printing the file as an image. To proceed, you have to clear the print queue first. Otherwise, you’ll keep facing the error.
So, delete all your spooler files as mentioned previously first. This will clear your print queue, and then you can proceed with this method. Before that, you need to restart your printer. Then, open the PDF file and press CTRL and P to bring up the printing options. Open the Advanced options and opt for printing the file as an image.
This should fix the error if it shows up only while you try to print PDF files. So, check whether the problem is resolved and proceed with the next solution if it persists.
-
Repair Corrupted System Files
The error that you’re facing might also have something to do with your computer’s system. Various crucial system files on your device may get damaged under various circumstances. As a result, they might cause quite a wide range of problems. And, this is one of the possible causes behind the HP printer error 49.4c02.
So, you must look for viruses and malware on your device first. Run a scan with reliable antivirus software for that purpose. After that, you can repair corrupt system files by various methods. In Windows systems, the System File Checker can make that task quite easy for you. It will find and fix any damaged system files.
Apart from that, you can also try out the DISM (Deployment Image Servicing and Management) tool. If that doesn’t work, you can also try a System Repair or reset the Windows system. Alternatively, you can also seek help from Printer Repairs Dubai experts.
-
Toggle Off the Advanced Printing Features
The Advanced feature provides you with additional control over various aspects of printing. And, you might sometimes face the HP printer error 49.4c02 when you’ve enabled this feature. So, disabling it might help you fix the problem. And, for that, you need to go to the Print Management section on your device. There, you’ll find a list of the printers that you use with your computer.
Right-click on the printer you’re using and open its Properties. Then, select the Advanced tab and find the Advanced Printing Features. Do you find it enabled? If yes, then uncheck the box beside it. Finally, check whether the error has been resolved.
What if the HP Printer Error 49.4c02 Persists?
The aforementioned methods are usually all you need to apply for a solution. But, none of them might work in every case. In such situations, you must immediately reach out to customer service. Apart from that, you can also reach out to a reliable printer repair centre to get a professional diagnosis and solution.